Metering Equipment Sample Clauses
The Metering Equipment clause defines the requirements and responsibilities related to the devices used to measure quantities such as energy, water, or other utilities under an agreement. It typically outlines who is responsible for providing, installing, maintaining, and testing the metering equipment, as well as the standards the equipment must meet. For example, it may specify that the supplier must ensure meters are accurate and accessible for inspection. The core function of this clause is to ensure accurate measurement and accountability for resource usage, thereby preventing disputes and ensuring fair billing between parties.
POPULAR SAMPLE Copied 1 times
Metering Equipment. The metering equipment shall be electronic trivector meters of accuracy class 0.2% required for the Project (both main and check meters). The main meter shall be installed and owned by the Company, where as check meters shall be installed and owned by …….ESCOM. Dedicated core of both CT‟s and PT‟s of required accuracy shall be made available by the Company to
Metering Equipment. 13.01. Utility will furnish, install, own and maintain metering equipment capable of measuring the flow of kilowatt-hours (kWh) of energy. The Customer's service associated with the CRG will be metered at a single metering point. The metering equipment will measure energy delivered by Utility to Customer and also measure energy delivered by Customer to Utility. Customer agrees to provide safe and reasonable access to the premises for installation of this equipment and its future maintenance or removal.
Metering Equipment. Suitable metering equipment at the metering points as described in Section 4.03 above shall include electric meters, potential and current transformers, and such other appurtenances as shall be necessary to give for each direction of flow the following quantities: (i) an automatic record of the kilowatt-hours for each clock-hour, and (ii) a continuous integration record of the kilowatt-hours.
Metering Equipment. Metering equipment shall be electronic tri-vector meters of accuracy 0.2 % required for the Project (both main and check meters). The main meter shall be installed and owned by the Company, whereas the check meter shall be installed and owned by the ...
Metering Equipment. 8.1 SONI shall have the right to meter the output from the User at the Connection Point and power flows will be metered at the Connection Point in accordance with the Metering Code.
8.2 The User shall ensure that its agents, employees, and invitees will not interfere with the Metering Equipment without the prior written consent of SONI, except to the extent that emergency action has to be taken to protect the health and safety of persons or to prevent serious damage to property adjacent to the Metering Equipment.
Metering Equipment. Member-Generator's System shall be equipped with sufficient metering equipment capable of measuring the net amount of electrical energy both produced and consumed by the Member-Generator, either by employing a single, bi-directional meter that measures the amount of electrical energy produced and consumed, or by employing multiple meters that separately measure the Member-Generator's consumption and production of electricity.
Metering Equipment. Seller will furnish, install, and maintain for the Term of this Agreement without charge to Buyer all required meters, instruments, recording devices, and other related data logging equipment required to measure and record all charges payable by Buyer under this Agreement (collectively, the "Metering Equipment").
Metering Equipment. If the Metering Equipment at a Connection Point:
(a) is not owned by ADEWAP, User is solely responsible for ensuring the accuracy of that Metering Equipment in accordance with all Applicable Laws and any applicable terms of this Agreement;
(b) is owned by ADEWAP, User:
(i) must ensure that ADEWAP and its Personnel are provided with access to that Metering Equipment for all relevant purposes, including the conduct of annual testing; and
(ii) acknowledges and agrees that the cost of undertaking that testing will be a Pass Through Amount for the purposes of this Agreement;
(c) fails, or the metering data from that Metering Equipment is considered by ADEWAP to be inaccurate then, without limiting clause 12.1(c) and subject to all Applicable Laws, the Parties must meet for the purpose of agreeing an appropriate methodology to recalculate and replace that data.
Metering Equipment. SABINE shall supply, operate and maintain (or cause to be supplied, operated and maintained at or near the Delivery Point) the following:
(i) meters with redundancy and other equipment as is necessary to accurately measure the volume of Gas delivered at the Delivery Point hereunder;
(ii) devices for collecting samples and for determining the quality and composition of Gas delivered at the Delivery Point hereunder; and
(iii) and any other measurement or testing devices which are necessary to perform the measurement and testing required hereunder at the Delivery Point. (collectively, the “Downstream Metering Equipment”). The Downstream Metering Equipment shall be designed and installed in accordance with the current recommendations of the American Gas Association, Report No. 3 and 9 for Ultrasonic Metering.
Metering Equipment. The actual metering equipment required, its voltage rating, number of phases and wires, size, current transformers, number of input and associated memory is dependent upon the type, size and location of the electric service provided. For all approved DG installations, HOTEC will provide a meter that can measure the “Delivered KWh” (energy delivered by the Cooperative); the “Received KWh” (energy delivered to the Cooperative by the Member-Producer). HOTEC will also require a secondary meter that measures the PV systems production.